Van Der Stahl V-460G Series, Руководство по эксплуатации

Страница: 77 / 116

V-460G/610G Series Operating Instructions Ver.4.02E
77
13
Depress an air pedal. (1st) 7KHYDFXXPJDVÀXVKLQJQR]]OHVPRYHIRUZDUG
14 Place a pouch to the seal area.
Place a pouch to the seal area and insert the nozzles in it. Stretch the
pouch out by pulling both sides by hands.
15 Depress the air pedal. (2nd)
A pressure lever descends and fastens a pouch with sponge rubbers.
Attention
When the lever is being lowered, removing foot from the
footswitch will raise the lever from its lowered position.
16
Depress the air pedal. (3rd)
When the air pedal is depressed for the third time, the following
procedures (from 1 to 13) are performed automatically.
1 The first vacuuming starts and the vacuum lamp turns ON.
2 When the vacuum level reaches to the set-up value with the
1
first
to penultimate vacuum level, vacuum process finishes. The vacuum
lamp turns OFF.
3 The first gas-flushing starts and the gas lamp turns ON.
4 When the set-up time set with the
2
first to penultimate gas-
flushing timer is passed, gas-flushing finishes.
5 Vacuuming and gas-flushing is repeated up to the last but one
cycle.
6 The final (n-th) vacuuming starts and the vacuum lamp turns ON.
7 When the vacuum level reaches to the set-up value with the
3
final
vacuum level, vacuuming finishes. The gas lamp turns ON.
8 When the set-up time set with the
4
final gas-flushing timer is
passed, gas-flushing finishes. The gas lamp turns OFF.
9
The nozzles return to the back position.
10 The pressure lever closes and sealing starts.
The heating lamp turns ON.
11 After heating is finished, the heating lamp is turned OFF and the
cooling lamp turns ON.
12 Cooling finishes and the cooling lamp turns OFF.
13 Sealing process is complete, and the pressure lever opens.
The vacuum nozzle moves forward automatically when the auto
return is activated.
17 Sealing is complete.
See 7XUQ2))WKHFLUFXLWEUHDNHUDQGSRZHUVZLWFKĺSDJH24)
and turn OFF the machine. When not using the machine for a while,
unplug the machine from the outlet.
(“n-GAS: VACUUM GAUGE VAC + GAS + SEAL” operation cont’d)