Van Der Stahl V-460G Series, Руководство по эксплуатации

Страница: 114 / 116

V-460G/610G Series Operating Instructions Ver.4.02E
114
ｙ
ｘ
［ 0 x ］
MAINTENANCE MODE
（■=ON □=OFF）
You can find the possible cause of problem with the
maintenance mode.
Referring to ³0DLQWHQDQFHPRGH´ĺSDJH
, show the maintenance mode on the screen.
Check which number(s) of X (input) and Y (output)
is/are indicated in the black.
When contacting
Van der Stahl Scientific , please tell us
this information for our better understanding of the
problem.
You can check the details of each input/output from
³(OHFWULFGLDJUDP´ĺSDJH.
If any of X1, X2, and X3 are broken, the broken
sensor(s) will stay ON and shown in black regardless of
machine operation.
Error message Check Solution
TEMP CONTROL PROBLEM
DO NOT OPERATE UNTIL
PROBLEM IS SOLVED
--------------
The SSR replay may be damaged.
※ Contact your local dealer or
FUJIIMPULE.
HEATING FAULT
Press ENT to escape
This error is displayed when the machine
does not reach to the set heating temperature
within the
Is the temperature sensor properly
installed?
The machine cannot measure
temperature if the temperature
sensor is not installed properly.
See “10-10 Temperature sensor
UHSODFHPHQW´ĺSDJH96) and
install it properly.
ĺ 'R\RXXVHDQH[WHQVLRQFRUG"
ĺ 'R\RXXVHWKH)8-,,038/6(
genuine heating element?
ź 'RQRWXVHDQH[WHQVLRQFRUG
ź 8VHRQO\WKH)8-,,038/6(
genuine heating element.
Items marked with ※ mark in the “Solutions”a column refer to the fact that these problems
should be addressed by an electrician. If there are any problems, please contact Van der
Stahl Scientific
.
15-4 Maintenance mode
15-3 Error display 3
X5 X4 X3 X2 X1 X0
Y5 Y4 Y3 Y2 Y1 Y0
X
Y
Y10