Van Der Stahl V-460G Series, Руководство по эксплуатации, Страница: 41 / 116

V-460G/610G Series Operating Instructions Ver.4.02E
41
［ 01 ］ SEAL ONLY
▼▲ Select operation#
Change setting
COUNTER
xxxxx
SELECT /MENU=ESC
1 Enter
2 Change
3 Delete 4 Nozzle
5 Maint
［0 x ］
▼ ▲ S e l e c t o p e r a t i o n #
P r e s s E N T t o d e l e t e
E.g.)
Before deletion:
After deleting 01 Seal only operation:
1
Ŷ
How to change heating temperature of
the currently displayed operation
pattern:
>> Press the [ ] key. The below display will
be shown on the screen. Go to procedure
2
.
2
Press the [ ] [ ] keys to place the cursor on
“3 Delete.” Press the [ ] key to select the
item. The below display appears.
3
Select the operation number you want to delete
using the [ ] [ ] keys.
4
When the desired operation number is
displayed on the screen, press the [ ] key
to delete it.
1
When one of the entered operation modes is
displayed like the one in the below illustration,
...
press the [ ] key. The below display will
be shown on the screen.
※ Above illustration is an example of when [01]
SEAL ONLY is displayed.
Ŷ
How to change heating temperature of the
operation pattern NOT currently displayed:
>> Refer to “8-4-2 Select the desired operation
QXPEHU´ĺSDJH.
After selecting the desired number, press the
[ ] key and go to procedure
2
.
No.1 = SEALING ONLY
No.2 = VAC+SEAL timer
No.3 = 1-GAS+SEAL manual
No.1 = VAC+SEAL timer
No.2 = 1-GAS+SEAL manual
No.3 = N/A
8-4-4 Delete the operation pattern
8-4-5 Set heating temperature
TIPS
When one operation number is deleted,
the following numbers will move
forward automatically.
TIPS
If the registered number is only [01],
you cannot delete it. When you try to
delete, a message “You can not delete
all” will appear on the display.
Attention
Once the registered operation
pattern is deleted by pressing the
[
] key, the data cannot be
restored nor reversed.
TIPS
You can cancel deletion by pressing the
[ ] if it has not yet confirmed by
pressing the [ ] key.