
V-460G/610G
Series Operating Instructions Ver.4.02E
32
[ 01 ] SEAL ONLY
▼▲ Select operation#
Change setting
COUNTER
xxxxx
[ 04 ] 02-GAS timer
▼▲ Select operation#
Change setting
COUNTER
xxxxx
1 Turn ON the circuit breaker.
2 Turn ON the power switch.
3 The operation No. [01] will be displayed on
the screen.
The operation No. [01] SEAL ONLY will be shown
on the screen.
= Operation No. [04] 2-GAS / Timer
The seal parameters set at the time of factory shipment:
HT (Heating Temperature) : 140ºC/ 280ºF, CT (Cooling Temperature) : 100ºC/200ºF
1-VT (1st Vacuuming Time) : 1.0second, 2-VT (2nd Vacuuming Time) : 1.0second,
1- GT (1st Gas flushing Time) : 2.0seconds, 2-GT (2nd Gas flushing Time) : 2.0seconds, Nozzle stroke = N1
= See ³2SHUDWLRQSURFHGXUHV©Q*$67,0(59$&*$66($/ª´ĺSDJH.
4 Select the operation number [04].
Press / keys to select the pre-installed
operation number [04].
5 Set seal parameters
For how to change sealing parameters and nozzle
stroke, see ³+RZWRVHWWKHFRQWUROXQLW´ĺ
page 39).
6 Depress an air pedal (1st)
The nozzles move forward.
7 Place a bag to the sealing area
Set a pouch to the sealing area while confirming
the seal position. Insert the nozzles inside the bag.
8 Depress the air pedal (2nd)
Pressure lever descends and the silicone sponges
clamp the bag. Please keep on depressing the foot
switch until the lever closes.
9 Depress the air pedal (3rd)
When an air pedal is depressed for the third time,
the following operating procedures will be
performed automatically.
・
The 1st vacuuming starts and the vacuum lamp
turns ON.
・
Once the time specified in first vacuum time
elapses, 1st
vacuuming finishes and vacuum lamp
turns OFF.
・
The 1st gas-flushing starts and the gas-flushing
lamp turns ON.
8-1-4 Sample operating procedure: “2 cycles of timer timer gas-
fl sealing” operation
TIPS
If any change has been made to the
control unit setting after factory
shipment, some of the following content
may be different.
Attention
When the pressure lever is being
lowered, removing foot from the air
pedal will raise the lever from its
lowered position due to a safety
mechanism.
Содержание V-460G Series
