Van Der Stahl V-460G Series, Руководство по эксплуатации

Страница: 14 / 116

V-460G/610G Series Operating Instructions Ver.4.02E
14
● The level of operation noise may vary between each machine
due to its characteristics
Run test trials before beginning operation
Depending on the type of film being used, heating / cooling conditions
will differ. Run test trials to find the optimum sealing condition,
especially when trying to find the tightest seal possible.
● The I-heating element installed to V-460G/610G series
V-460G/610G series is installed with the I-heating element, which is
made of material whose thermal expansion is minimal.
Features of the I-heating element:
1
Because the I-heating element expands less during heating
compared to conventional heating elements, they are less likely
to break, such as in the middle of the heating element.
2
The I-heating element may gradually turn black in color after
repeated heating, but this will not have an effect on its use.
3
The I-heating element may show some rusting after prolonged
storage, but this will not have an effect on its use.
4
The connecting ends of the I-heating element may tarnish or
show discoloration depending on the environment, but this will
not have an effect on its use.
When you order the spare heating element, please make sure to order
the “I”-heating element referring to the parts numbers listed in “16
&RQVXPDEOHSDUWVOLVW´ĺSDJH.
● Sticker
The sticker of I-heating element is adhered to the upper right position
of the seal cover of the machine for your easy identification of heating
element material. When replacing the heating element, please make
sure that the same sticker is adhered to the box of spare heating
element.
About the I-heating element
Caution
Make sure to use the I-heating element to V-460G/610G
series; otherwise, the machine cannot control the heating
temperature properly.
Terminal