Valtra Versu N Series Скачать руководство пользователя страница 78

Страница: 78 / 518

3.2.3

Adjusting the right-side armrest

You can adjust the back/front position and the sideways position as well as the

inclination of the armrest.

GUID-ABF6923F-EFCF-4E15-989E-28D0ABDE2040

1. Sideways adjustment

2. Forward/backward position adjustment / armrest height adjustment

3. Inclination adjustment

•

Adjust the armrest sideways with the sideways adjustment lever.

•

Pull the lever upwards.

•

Turn the armrest into the desired position.
You can turn the armrest to both directions from the middle position.

There are 5 positions available.

•

Adjust the position of the armrest forwards and backwards by loosening the

locking knobs, adjusting the armrest and then tightening the locking knobs.

•

Adjust the height of the armrest by fully opening and detaching the locking

knobs, adjusting the armrest height and then attaching the locking knobs.
There are three levels for adjusting the armrest height.

•

Adjust the armrest inclination.

•

Lift up the front edge of the armrest.

•

Set the armrest to the desired position.

3.2.4

Adjusting the steering wheel

You can adjust the steering wheel position with a lever and a locking pedal.

CAUTION: Do not adjust the steering wheel position while driving.

There is an increased risk of loss of control.

3. Operation

- 76 -

Содержание Versu N Series







































































































































































































































































































































































































































































































































Результаты поиска

Содержание Versu N Series

Отзывы:

Бренды по названию

Популярные бренды

Valtra Versu N Series, Руководство оператора

Результаты поиска

Содержание Versu N Series

Отзывы:

Бренды по названию

Популярные бренды