Valtra Versu N Series Скачать руководство пользователя

Страница: 262 / 518

OFF

CONTR

GUID-C5CDD7BE-30CA-44AD-A76A-A67B1A2AE15D

1. Auxiliary hydraulics on/off push button

2. Changeover button for front linkage/front loader (optional)

3. Joystick functions selector

4. Joystick with push buttons

•

Activate the auxiliary hydraulics by pressing the on/off push button.
The on/off symbol on the push button is lit green.

•

Switch the joystick functions selector to position

•

If the tractor is equipped with a front linkage/front loader changeover push

button, check that the push button light is not lit.
When lit, the front linkage is activated.

•

To raise the front loader, pull the joystick rearwards.

•

To lower the front loader, push the joystick forwards.

•

To control the front loader tilt, move the joystick sideways.

•

To tilt the loader rearwards, pull the joystick towards yourself.

•

To tilt the loader forwards, push the joystick away from yourself.

•

To control the left quick couplings on the front part of the loader (optional),

press the lower push button in the joystick.
By pressing the button and simultaneously turning the joystick sideways

towards yourself, the pressure is in the red connectors. By turning the

joystick away from yourself, the pressure is in the blue connectors.

•

To control the right quick couplings on the front part of the loader (optional),

press the upper push button in the joystick.
By pressing the button and simultaneously turning the joystick sideways

towards yourself, the pressure is in the red connectors. By turning the

joystick away from yourself, the pressure is in the blue connectors.

3. Operation

- 260 -

Содержание Versu N Series







































































































































































































































































































































































































































































































































Результаты поиска

Содержание Versu N Series

Отзывы:

Похожие инструкции для Versu N Series

Бренды по названию

Популярные бренды

Valtra Versu N Series, Руководство оператора

Результаты поиска

Содержание Versu N Series

Отзывы:

Похожие инструкции для Versu N Series

Бренды по названию

Популярные бренды