manualshive.com logo in svg

Valtra Versu N Series, Руководство оператора

Поделиться
Скачать
Valtra Versu N Series Скачать руководство пользователя страница 388

22. Tighten the front loader frame bolts on the left hand side.

1

GUID-CFE893B9-321B-4AC4-AE59-5FC9AC411733

1. Front loader frame bolt

The tightening torque is 600 Nm.

23. Fit the AdBlue tank.
24. Connect the electric connector and hoses to the tank heating sensor cap.
25. Fit the engine control unit bracket.
26. Tighten the AdBlue tank fastening screws.
27. Fit the cover plate on the AdBlue tank.
28. Fit the air intake pipe.

4.7.4.8 

Checking the front loader frame bolt tightness with Forest equipment

Check the front loader frame bolt tightness periodically.
IMPORTANT: The front loader frame bolt tightness must be checked every 50

hours if the front loader is used continuously with heavy loads.

Forest equipment is optional equipment.
1. Tighten the front loader frame bolts on the right hand side.

4. Maintenance

- 386 -

Содержание Versu N Series







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды