Valtra Versu N Series, Руководство оператора

Страница: 431 / 518

• Four-wheel drive is engaged.
• Differential lock is engaged.
• The system could not set the required engine speed within 7 seconds. (The
tractor may be pulling too heavy a load, for example.)
• The speed of the tractor varied too much during the calibration.
• One of the sensors to be calibrated is in fault mode.
4.8.2 Track widths
The track width is measured between the middle of the tyres. If needed, adjust
the track widths.
IMPORTANT: The maximum allowed width of the tractor is 2550 mm (if larger
width is not nationally allowed).
In many work applications, it is advisable to adjust the track widths so that the
track made by the front tyres is covered by the track made by the rear tyres.
When using narrow track widths for the rear axle, check that the lower links do
not touch the tyres. When required, lock the side regulators.
IMPORTANT: According to the EU directives the smallest allowed distance
between the side of the tyre and the mudguard is 40 mm and between the top of
the tyre to the mudguard is 60 mm.
4.8.2.1 Front axle track widths
The front axle track widths (in mm) are listed in the following tables.
Adjustable discs
GUID-703FFB40-
FF10-41A4-8BEF-37E
4E96AAB89
GUID-7A085113-0F7B
-4AEB-BB3F-
D507FC1B8A85
GUID-7332B366-
F3DC-441A-8DB9-3C6
3A4429101
GUID-58DF36B2-
A96F-43DB-80EB-6F9
97F04DB2D
GUID-
C76BBD0D-4B94-459
6-
A91D-08E13B590985
GUID-F95330D7-
D0BF-43A0-
AE71-3BCD819FD82
9
GUID-
A477C4D9-5A03-4FA9
-A339-19B7D28FAC21
440/65R28,
16.9R28,
420/70R28,
420/85R28,
480/70R28,
480/65R28
2045 1735 1645 1930 1840 –
2135
1)
14.9R28,
380/85R28
2045 1735 1645 1930 1840 – 2135
520/60R28,
540/65R28
2045
1) 1735 1645 1930 1840 –
2135
1)
13.6R24,
420/70R24,
440/65R24,
480/65R24
1963 1854 1763 1814 1723 – 2054
1)
Vehicle overall width over 2 550 mm
4. Maintenance
- 429 -