Valtra Versu N Series, Руководство оператора

Страница: 285 / 518

Symbol Operation Switch positions when
running a programme
Limitation
Differential lock engaged.
4)
Differential lock
disengaged.
4)
Current socket activated.
5)
Current socket
deactivated.
5)
PAUSE
Pause in the programme.
END
End of the programme.
1)
The system checks the correct positions of these switches before recording and running. If the
position is incorrect, the symbol of the operation flashes on the display.
2)
The system does not check the adjustments of this equipment; they must be checked and
adjusted by the operator.
3) The function is not possible if the valve controls the front loader.
4)
If these operations are in the AUTO mode when recording, the operation is not recorded. If the
operation is recorded and the switch is turned to AUTO position before use, the switch is
dominant. In that case, the recorded operations of that switch do not occur.
The rear PTO is an exception. The AUTO mode of the rear PTO cannot be active together with
the U-Pilot.
5)
The power switch controls the current socket next to it and the power outlet at the rear end of
the tractor.
3.20.5 U-Pilot programme examples
Example
Using a reversible plough
Coming to headland:
Lift of the plough.
Four-wheel drive (4WD) disengaged.
Differential lock disengaged.
PS 1 Powershift gear 1.
10
s
+
3R
Reversion of the plough.
END
End of the programme.
Leaving the headland:
3. Operation
- 283 -