Valor L1 Series, Инструкция по установке и эксплуатации

Страница: 7 / 72

7
OWNER’S
INFORMATION
Gas valve
Battery holder
& wall switch
Fireplace
Receiver Gas valve
The receiver and gas valve are located on the bottom of the
fi replace behind the front panel. The battery holder is located
next to the wall switch.
Thermostatic
Remote
Control
Wall Switch Remote control
handset
ON: parallel to pipe OFF:
perpendicular to
pipe Wall Switch
Fireplace Control Devices
There are two ways to control your
fi replace.
1. Thermostatic Remote Control
can be programmed to function
automatically—see pages 8–12;
2. Wall Switch turns fi re on, off and
controls fl ame height—see page 13.
How to Turn Your Fireplace ON
Press and hold button(s) until a short beep confi rms the
start sequence has begun; release buttons.
Continuing beeps confi rm the ignition is in process.
When the pilot is lit, the gas fl ows—see
Using the
Remote Control section for more information.
How to Turn Your Fireplace OFF (and pilot)
Press and hold the OFF button for a second (either on
the handset or the wall switch).
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
In the unlikely event that you cannot turn off your
fi replace with the remote control handset, use the
wall switch; if the wall switch malfunctions and will not
turn off the fi replace, wait 6 hours and the fi replace
will automatically go to pilot. You can then access the
controls inside your fi replace.
Alternately, turn off gas supply. In all cases, call your
dealer for service assistance.
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don’t want it on.
• On gas valve, turn dial from ON
position to MAN position as
shown. Turning dial to MAN will
ensures that main burner cannot
come on. The pilot will remain on
if lit.
• Alternately, remove all batteries
from the battery holder next to the
wall switch as well as the battery
from the handset.
Automatic Shut-Off (in
certain conditions)
Your fi replace’s remote control is equipped with an
automatic shut-off mechanism which is activated
in certain conditions. See page 12 in the
Using the
Remote Control section for a description of this feature.
Operating Your Fireplace
WARNING
RISKS OF SEVERE BURNS! SURFACES OF
THE FIREPLACE ARE VERY HOT DURING
OPERATION!
Ensure fi replace has cooled off
before accessing controls.
!
Wall Switch Remote control
handset