VALMETAL H Series, Руководство оператора и каталог запасных частей

Страница: 11 / 86

2.6 STORAGE SAFETY
1. Store the Grinder in an area away from human
activity.
2. Do not permit children to play on or around the
stored machine.
3. Make sure the unit is sitting, or blocked up firm
and solid and will not tip or sink into a soft area.
4. Cover with a weather-proof tarpaulin and tie
down securely.
2.7 TIRE SAFETY
1. Failure to follow proper procedures when mount-
ing a tire on a wheel or rim can produce an
explosion which may result in serious injury or
death.
2. Do not attempt to mount a tire unless you have
the proper equipment and experience to do the
job.
3. Have a qualified tire dealer or repair service per-
form required tire maintenance.
2.8 SAFETY DECALS
1. Keep safety decals and signs clean and legible
at all times.
2. Replace safety decals and signs that are missing
or have become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety decals or signs are available from your
Dealer Parts Department or the factory.
How to install Safety DecaIs :
* Be sure that the installation area is clean
and dry.
* Decide on the exact position before you
remove the backing paper.
* Remove the smallest portion of the split
backing paper.
* Align the decal over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
* Slowly peel back the remaining paper and
carefully smooth the remaining portion of
the decal in place.
* Small air pockets can be pierced with a pin
and smoothed out using the piece of decal
backing paper.
SAFETY
7