VALMETAL H Series, Руководство оператора и каталог запасных частей

Страница: 43 / 86

5.2.3 GEARBOX OIL
The oil level in the gearbox must be checked every 3
months or after 200 bales to insure that the gears
have proper lubrication. If leakage is observed, check
the oil level more frequently.
To check the oil level, follow this procedure:
1. Place all controls in neutral, stop the engine,
remove the ignition key and wait for all moving
parts to stop before dismounting.
2. Remove front guard.
3. Remove oil level plug "B" on the side of the gear
box. Remove fill-up cap “A”.
4. Add through the fill plug "A" until the oil just starts
to come out of the level plug “B”.
5. Install and tighten the fill and level plugs.
6. To change the oil in the gearbox, it is necessary
to remove the gearbox. Remove the tub drive
chain, the belts and then remove the 8 bolts
holding the gearbox.
7. Drain into a container and place in an approved
disposal site.
8. Install the drain plug and tighten.
9. Add oil through the fill plug until oil starts to come
out of the level plug hole.
10. Tighten all plugs.
11. Install and secure the guard.
WARNING
Machine is shown with guard removed for
illustrative purposes only. Do not operate
machine with guard removed.
Fig. 36 GEARBOX
A
B
SERVICE & MAINTENANCE
39