VALMETAL H Series, Руководство оператора и каталог запасных частей

Страница: 44 / 86

SERVICE & MAINTENANCE
40
5.2.4 BREATHER CLEANING
The breather must be able to vent to atmospheric
conditions during the heating and cooling cycles while
operating. If it cannot, oil will seep out the seals and
the machine will run low on oil. Prolonged operation
with low oil levels will damage the internal working
components.
To clean:
1. Remove the breather.
2. Stop up the breather opening using a plastic plug
or a clean rag to prevent contaminants from
entering the gearbox.
3. Soak the breather in solvent for one hour.
4. Use a pointed instrument or a wire to remove
any residue from the breather passages.
5. Blow out using high-pressure air.
6. Blow through the breather to insure that the
passages are clear.
7. Install and tighten breather in the gearbox.
Fig. 37 BREATHER