Pag 44
Double Head Cutting Operation
You do not need to make the file which only for using double blade separately.
When you cut all labels by using single blade, you need to choose all labels to cut and the machine should
be set only ‘Cutter 1’ is on. (the others should be off.)
< PICTURE 5.47 >
When you cut all labels by using double blade, you need to choose the labels at first blade area and the
machine should be set ‘Cutter 1’ and ‘Cutter 2’ are on. (The others should be off.)
And you need to adjust the gap of first and second head by manually.
< PICTURE 5.48 >
Trajectory Optimization
There are more advanced features to control the cutting quality even better. These functions can adjust the
turn radius of knife tip for round corners and right corners differently. Also you can add cutting line when
starting point and end point do not meet. You can adjust starting point or end point selectively.
Open the software and click setting, click trajectory optimization
