Pag 33
5-5 How to connect the machine with your PC
1. Data Transfer Mode - NETWORK
Set Transfer M. as ‘Network’, among ‘UART’, ‘Network’, and ‘USB’
< PICTURE 5.20 >
2. Set Network P. as
‘8088’
.
< PICTURE 5.21 >
3. Set Network ID and Target ID. (If you don’t know the IP address, please ask to network manager.
‘Network ID’ is for the machine (Duo-Blade
F
). And Target ID is for your computer IP address.
< PICTURE 5.22 >
After network setting, please turn off, turn on the machine to apply Network connection.
4. Run the software and enter Settings > Output Port. And choose ‘Net Port’ like below picture and input
the Machine’s IP address (same as the ‘Network ID’ on the machine’s LCD panel.)
