Pag 14
2.
Replace cutting blade
See Figure 4-4~4-5 and carefully hold the blade to avoid cutting yourself
< PICTURE 4-4 >
< PICTURE 4-5 >
Step 1 - Rotate the blade length adjustment knob to retract the blade back to the knife
holder as shown in Figure 4-6.
< PICTURE 4-6>
Step 2 - Rotate the knife holder counterclockwise to remove it from the knife holder.
Step 3 - Remove the blade from the holder cap.
Step 4 - Insert the new blade into the hole in the holder cap.
Step 5 - Insert the blade into the holder cap and tighten the holder cap.
3. Adjust the blade length
If the blade protrudes longer than the thickness of the media to be cut, it can damage the cutting pad.
Be sure to adjust the blade length correctly.
Step 1 - Rotate the blade length adjustment knob to adjust the blade length. The blade extends in the
direction of "A" and retracts in the direction of "B". Spin for each rotation of the knob, the blade moves
approximately 0.5 mm. See Figure 4-7.
