Valet Digital Скачать руководство пользователя страница 55

Страница: 55 / 64

Maintenance

The complete system should be tested at regular intervals. We suggest testing

it once every fortnight or at least once per month.

Replacement batteries (when required) are available by calling 1800 050 333.

Real Time Clock battery

Your Valet Digital is equipped with a real time clock for logging alarm events

and billing information. The battery for the Real Time Clock is located in the

Main Control Unit, replacing or removing this battery will result incorrect event

logging and billing. Please DO NOT attempt to remove/replace this battery.

Real-Time Clock Battery Specifications

Battery Type

CR2025 Lithium

Capacity

160mAH

Voltage

Main Control Unit Backup Battery

The backup battery is used for providing normal alarm operation during times

when the normal AC mains power is unavailable (such as during a blackout).

The backup battery automatically charges when the Main Control Unit is

connected to the AC adapter. The system has a self-test function to test the

backup battery; it will report a low backup battery on disarm, by beeping 10

times and will also notify the user through the event logging through the

monitoring system.

Manual Battery Test:

Disconnect the Power Supply and ensure the system

will arm and disarm from back up battery power only. If the system failed the

test, then reconnect the power supply and allow it to charge for three hours

before performing another test. Failing the test again will confirm that the

battery needs to be replaced.

Main Control Unit Battery Replacement Procedure

1. Turn off the alarm system by turning the keyswitch to the ‘OFF’ position.

2. Undo the unit and remove the cover.

3. Replace with a new battery of the same type.

Содержание Digital

































































Результаты поиска

Содержание Digital

Отзывы:

Бренды по названию

Популярные бренды

Valet Digital, Инструкция по эксплуатации

Результаты поиска

Содержание Digital

Отзывы:

Бренды по названию

Популярные бренды