25
Step 3:
Changing Your System From The Residential To The
Commercial or Basic Plans:
Your Valet Digital is pre-programmed at the factory on the Residential Standard Plan. If you
wish to change to the Commercial or Basic Plans, please follow the procedure below.
1. Turn the Main Control Unit off via the key switch.
2. After waiting at least 5 seconds, turn the main control unit key switch back to the on
position.
3. The RED LED indicator on the main control unit will now flash very quickly.
4. Immediately press and hold either Button 1 to select the Residential Standard plan
or
Button 2 to select the Commercial Plan,
or
Buttons 1 & 2 together simultaneously to
select the Basic Plan. Keep the selected button/s depressed until the confirmation beeps
are heard (approx 5 seconds).
5. One beep = Residential Standard Plan, Two beeps = Commercial Standard Plan, Three
Beeps = Residential Basic Plan
TO CHANGE BETWEEN PLANS
1.
Turn the Main control Unit
off
via the key switch.
2.
After waiting at least 5 seconds, turn the main
control unit key switch back to the
on
position.
3.
The RED LED indicator on the main control unit will
now flash very quickly.
4.
Press & hold
button/s until unit
beeps.
Immediately
press and hold down the necessary
button/s for your selected plan (Button 1 =
Residential Standard Plan, Button 2 = Commercial
Standard Plan, Buttons 1&2 together = Residential
Basic Plan) on a remote control until the
confirmation beeps are heard (approx 5 seconds).
5.
COMPLETE
One beep = Residential Standard Plan, Two beeps
= Commercial Plan, Three beeps = Residential
Basic Plan
PLEASE NOTE:
If you wish to change back to the Residential Standard Plan after registering your system,
you must notify the VALET Monitoring Centre by speaking to an operator on
1300
302 293.
