Valet Digital Скачать руководство пользователя страница 24

Страница: 24 / 64

Step 2: Install the Main Control Unit

The Main Control Unit requires both AC power and a phone line to be plugged

in. Therefore, it should be located as close as possible to a power and phone

outlet and preferably mounted out of sight. For maximum wireless range,

mount the unit at a height of 1.5m or greater from the floor, and ensure there

are no metal objects directly adjacent to the antenna.

Once installed, the antenna on the back of the main control unit must be

straightened so that it is vertical.

Note: Make the antenna as straight as

possible, as even the smallest bends reduce the wireless range by up to

10 times. DO NOT ever attempt to shorten or lengthen the antenna.

The Valet Digital has been designed with most single & two storey residential

/ business premises in mind. In some instances however, (due to the

construction of the building) range may be diminished, and this may require

you to locate either the main control unit, the external siren, or the alarm

detector closer to one another to achieve reliable performance.

Installing the Main Control Unit

1. Drill mounting holes (7mm

Diameter) into the chosen location

(preferably 1.5m or greater from

the floor).

2. Push the supplied wall plugs into

the holes then mount the unit on

the wall using the supplied

screws.

3. Plug the power adapter (with the

right angle plug) into your power

point (leaving it switched off), and

connect the right angle plug into

the Main Control Unit.

4. Connect your phone line via the

line socket using the lead

provided. If using a regular phone

from the same wall socket,

connect it to the phone socket.

5. Turn the powerpoint on where the

power adapter is connected.

Turn the master keyswitch on the

main control unit to the on

position.

Antenna –

Keep

vertical &

straight

Содержание Digital

































































Результаты поиска

Содержание Digital

Отзывы:

Бренды по названию

Популярные бренды

Valet Digital, Инструкция по эксплуатации

Результаты поиска

Содержание Digital

Отзывы:

Бренды по названию

Популярные бренды