47
TO ADD A DETECTOR …continued…
Within 60 seconds
Within 60 seconds
Within 60 seconds
6.
Press to add in STAY
& AWAY modes
OR
Press to add in
AWAY mode only
OR
Press to add in 24
hour mode
This
option
will
enable the detector
in both STAY and
AWAY modes.
This option will
disable the detector
in STAY mode
Use this option if
you are adding a
smoke detector.
The siren will
beep
1
time
as
confirmation
of
learning the last
triggered detector.
The siren will
beep
2 times
as
c
onfirmation
of
learning the last
triggered detector.
The siren will
beep
3 times
as
c
onfirmation
of
learning the last
triggered detector.
7.
Walk Test mode
The system will
automatically
enter
Walk Test
mode.
During this time, the siren will beep the
number of times of the zone that has been
triggered.
Label
the detector
with its zone number
for future reference. Detectors, which have been set
to 24 hour mode, will still trigger the alarm. If a
tamper switch is pressed on the main control unit or
a wireless detector the siren will sound a low tone
beep.
8.
Press to exit
When you press
Button 2
, the system will
exit
programming and walk test mode. You have now
completed adding a new detector.
NOTE:
Refer to (
5
) If you trigger a detector that is already learnt in you will
hear one low tone beep, simply trigger the correct detector until you hear the
siren give the normal zone confirmation beeps. You need to do step (
6
) after
the correct detector has been acknowledged, as it will keep accepting any
unlearnt detector until step (
6
) is done or it times out (60 seconds).