Valeport SWiFT, Руководство по эксплуатации

Страница: 52 / 57

Declarations of Conformity
©
2021
– Valeport Ltd
Page | 48
In accordance with 47 CFR § 15.19, the end product shall bear the following statement in a
conspicuous location on the device:
"This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions;
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation."
When the device is so small or for such use that it is not practicable to place the statement above
on it, the information shall be placed in a prominent location in the instruction manual or pamphlet
supplied to the user or, alternatively, shall be placed on the container in which the device is
marketed.
In case, where the final product will be installed in locations where the end-user is not able to see
the
FCC ID and/or this statement, the FCC ID and the statement shall also be included in the end-
product manual.
11.2.6 FCC and IC IDs
Model FCC ID IC ID
NINA-B111 XPYNINAB1 8595A-NINAB1
NINA-B112 XPYNINAB1 8595A-NINAB1
Table: FCC and IC IDs for different models of the NINA-B1 series modules
11.2.7 Bluetooth Qualification Information
The NINA-B1 series modules have been qualified according to the Bluetooth version
4.2 and 5.0 specifications. For an end product with NINA-B1 integrated, no further
qualification is required. If the end product is to be Bluetooth listed, the QD ID listed
in Table 20 shall be included in the end product listing. Use Table 20 to select the
QD ID to refer to, depending on what version of the u-connectXpress software or, for
open CPU, what version of the Nordic SoftDevice is used.
Bluetooth
Version Bluetooth Product
Type
QD ID Listing Date
Nordic SoftDevice
S132 version u-connectXpress
Software Version
4.2 End Product 85618 16-Aug-2016 3.0.0 to 4.0.x 1.0.0 to 3.0.1
5.0 End Product 100763 18-Sep-2017 5.0.0 or later 4.0.0 or later
Table: NINA-B1 Bluetooth QD IDs
There is a u-blox type AG OBS421 Bluetooth module fitted in the USB communications device supplied
with the SWiFT. Please see section Bluetooth Module for details