Valeport SWiFT, Руководство по эксплуатации

Страница: 35 / 57

Important Information
Page | 31
©
2021
– Valeport Ltd
7.2 Bluetooth Sleep Mode in Valeport Ocean
Primarily designed for use on long duration autonomous vessels, a Bluetooth Sleep Mode has
been developed for SWiFT to provide maximum endurance.
A Bluetooth Sleep Mode was made available in SWiFTs delivered after May 2018. If your SWiFT
is enabled to operate in this mode the Bluetooth LED will flash at 1 Hz, while in this mode. If in
range, the LED on the paired PC Bluetooth Module will show as connected.
From September 2019 Bluetooth Sleep Mode changed when a new SWiFT Bluetooth Module was
fitted to new instruments. If your SWiFT is enabled to operate in Bluetooth Sleep Mode all the
LEDs will be switched off, while in this mode. If in range, the LED on the PC Bluetooth Module will
show as connected.
When in Bluetooth Sleep Mode, the timeout for auto power down is still enabled but the SWiFT can
be woken up by sending a character over the Bluetooth link, this can be done by clicking the
‘run’
button in Ocean, or manually in a terminal package. The SWiFT can also be woken from
Bluetooth Sleep Mode by rotating the switch ring by two quarter turns.
From the release of Valeport Ocean, control of Bluetooth Sleep Mode from the application interface
was introduced.
To enable the mode, Select Bluetooth Sleep mode in the Settings option:
The Sleep Mode icon, in the top right-hand corner of the operational screen, will change from
greyed out to solid black, click it to set the SWiFT into Sleep mode: .
The following message is displayed if the SWiFT is successfully placed into Sleep Mode:
In this mode all sensors are disabled and the SWiFT will appear to be off. If in range, the LED on
the PC Bluetooth Module will show as connected (solid blue).