Valeport SWiFT, Руководство по эксплуатации

Страница: 54 / 57

Declarations of Conformity
©
2021
– Valeport Ltd
Page | 50
11.2.11 Anatel Brazil Compliance
Statement translation:
“This equipment operates on a secondary basis and, consequently, must accept harmful
interference, including from stations of the same kind, and may not cause harmful interference to
systems operating on a primary basis.”
11.2.12 Australia and New Zealand Regulatory Compliance
The NINA-B1 modules are compliant with AS/NZS 4268:2012/AMDT 1:2013
standard
– Radio equipment and systems – Short range devices – Limits and
methods of standard measurement made by the Australian Communications and
Media Authority (ACMA).
11.2.13 South Africa Regulatory Compliance
The NINA-B1 modules are compliant and certified by the Independent Communications Authority
of South Africa (ICASA). End products that are made available for sale or lease or is supplied in
any other manner in South Africa shall have a legible label permanently affixed to its exterior
surface. The label shall have the ICASA logo and the ICASA issued license number as shown in
the figure below. The minimum width and height of the ICASA logo shall be 3 mm. The approval
labels must be purchased by the customer’s local representative directly from the approval
authority ICASA. A sample of a NINA-B1 ICASA label is included below:
TA-
2016/2760
APPROVED