Power Saving Modes
©
2021
– Valeport Ltd
Page | 32
Clicking the
‘run’
icon to wake the SWiFT, the LEDS on the SWiFT will activate and within 10
seconds a status message will be transmitted from the SWiFT and then updated every 10
seconds.
If you deploy the SWiFT while in sleep mode
– no profile will be recorded
7.2.1
Bluetooth Sleep Mode Detail
– Manual Operation
(Post September 2019)
Enable Low Power Mode:
#160;1
Enable Low Power sleep mode
#160;0
Disable Low power sleep mode
#161
Read Low power sleep mode
7.2.1.1 To Place a SWiFT into Low Power Sleep Mode:
#162 Will return an error if Low Power Sleep mode is disabled.
Issue the serial command (#162) to the SWiFT. This powers down the main processes leaving
only the Bluetooth connection running.
All lights will turn off. In this mode the SWiFT will draw ~2.6mA.
7.2.1.2 To Wake a Swift from Low Power Sleep Mode:
Send any character. Do not use # as this will interrupt the instrument. If the instrument is
interrupted, it will need a #028 command to set into run mode.
If the SWiFT has been successfully woken up, within 10 seconds a status message will be
transmitted from the SWiFT and then updated every 10 seconds.
7.2.2
Low Power Mode Detail - Pre September 2019
If you have an older SWiFT
– pre-September 2019 and require to operate in a low power mode,
please contact Valeport to discuss upgrading your instrument.
Содержание SWiFT
Страница 47: ...Important Information Page 43 2021 Valeport Ltd 11 1 SWiFT and SWiFT plus 11 1 1 EU Declaration of Conformity...
Страница 48: ...Declarations of Conformity 2021 Valeport Ltd Page 44 11 1 2 UK Declaration of Conformity...
Страница 49: ...Important Information Page 45 2021 Valeport Ltd...