Valeport SWiFT, Руководство по эксплуатации

Страница: 56 / 57

Declarations of Conformity
©
2021
– Valeport Ltd
Page | 52
11.3 PC Bluetooth Module
11.3.1 EU Declaration of Conformity
SWiFT CTD Profilers have u-blox type AG OBS421 stand-alone dual-mode Bluetooth® module
fitted as standard. There is the same type of Bluetooth module fitted in the USB communications
device supplied with the SWiFT.
It complies with the essential requirements and other relevant provisions of Radio Equipment
Directive (RED) 2014/53/EU and Restriction of Hazardous Substances (RoHS) Directive 2011/65/E
Essential Requirements
Radio Equipment Directive
2014/53/EU Standards
Safety & Health
(Article 3.1a) IEC 60950-1:2005 + A1:2009
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 +
A2:2013
EN 62479:2010
EMC (Article 3.1b) EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1
IEC 60601-1-2:2007 (Medical Electrical Equipment
Radio Spectrum Efficiency
(Article 3.2) EN 300 328 V2.1.1
Essential Requirements RoHS
Directive 2011/65/EU Standards
Prevention
(Article 4.1) EN 50581:2012
11.3.2 FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
11.3.3 Radio Frequency Exposure
The OEM Serial Port Adapter contains a small radio transmitter and receiver. During
communication with other Bluetooth products the OEM Serial Port Adapter receives and transmits
radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2400 to 2500
MHz. The output power of the radio transmitter is very low.
When using the OEM Serial Port Adapter, you will be exposed to some of the transmitted RF
energy. This exposure is well below the prescribed limits in all national and international RF safety
standards and regulations.
11.3.4 Potentially Explosive Atmospheres
Turn off your electronic device before entering an area with potentially explosive atmosphere. It is
rare, but your electronic device could generate sparks. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They
include fuelling areas, such as petrol station, below deck on boats, fuel or chemical transfer or
storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or
metal powders.