Valcourt FP10R, Инструкция по установке и эксплуатации

Страница: 28 / 78

Page 28
Installation and Operation Manual - FP10 Lafayette II
ENGLISH
6.4.2 Alignement
To align the doors, open the doors and slightly
unscrew the set screws on the lower and upper
door hinges with a 3/32" Allen key to release the
adjustable hinge rods.
Using a flat screwdriver, turn the adjustable hinge rods
in the directions shown to adjust the doors. Tighten the
set screws on the door hinges when they are in the
desired positions.
Doors position
with more space
Doors position
with less space
Doors tilt up Doors tilt down
Top pintle
Bottom pintle
6.4.3 Gasket
It is important to replace the gasket with another having the same diameter and density to
maintain a good seal.
1. Remove the door and place it face-down on something soft.
2. Remove the old gasket from the door. Use a screwdriver to scrape the old gasket adhesive from
the door gasket groove.
3/32"