Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 45
Show Measured Parameters
Use the
CALCS
command to list the measurement parameters that are
supported by the HMW90 series transmitters. RH and T are measured
directly by the transmitter, the rest are calculated based on the measured
values.
CALCS
<cr>
Example:
>
calcs
RH
-
Relative Humidity
T
-
Temperature
Tdf
-
Dew/Frost point temperature
Td
-
Dew point temperature
Tw
-
Wetbulb temperature
h
-
Enthalpy
x
-
Mixing ratio
a
-
Absolute humidity
dTd
-
Dew/frostpoint depression
NOTE
Using this command on TMW92 and TMW93 transmitters will list all
parameters, even though these transmitters only provide the temperature
parameters.
Show Command Help
To see a short description of an individual command, issue the command
with a question mark as a parameter.
Example:
>
calcs ?
Display measured quantities