User's Guide _______________________________________________________________________
52 ___________________________________________________________________ M211399EN-F
Output a Reading Once
Use the
SEND
command to output a single measurement message.
SEND
<cr>
Example:
>
send
RH = 21.72 %RH T = 23.12 'C
Set Output Interval
Use the
INTV
command to change the output interval of the
automatically repeating measurement messages. The measurement
messages are repeated in the RUN mode, or after the
R
command has
been given.
INTV
[
n xxx
]<cr>
where
n
= time interval, range 0 ... 9999.
xxx = time unit = "S", "MIN", or "H"
The shortest output interval (with n = 0) outputs the measurement
messages as quickly as the transmitter produces them, without additional
delay.
Example:
>
intv 1 min
Output interval : 1 min
