Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 63
Test Relay Operation
Use the command
RTEST
to test the operation of the relay. Issue the
command without parameters to end the relay test.
RTEST
[
state
]<cr>
where
state = State of the relay contacts. Options are:
open
(open the relay contacts)
closed
(close the relay contacts)
Example (close relay contacts):
>
pass 9000
>
rtest closed
Relay test mode : Closed
Example (exit relay test mode, resume normal operation):
>
rtest
Relay test mode : Canceled
Other Commands
Enable Advanced Serial Commands
Use the
PASS
command to enable the advanced serial commands.
PASS
[
passcode
]<cr>
where
passcode = Passcode to enable advanced commands is
9000
.
Example:
>
pass 9000
