Installation manual auroTHERM 0020100606_02
36
5.5.8 Re-covering the roof
+5°C – +40°C
1
Fig. 5.38 Adapting the flexible apron
>
Remove the protective film from the adhe-
sive surface of the flexible apron
(
¬ Table 5.1/5.3, Item 17
).
>
Adapt the flexible apron to the shape of
the tiles.
>
Stick the flexible apron where parts over-
lap (
1
).
i
Make sure that the adhesive sur-
face is dry and free from dust and
grease.
>
As required, (e.g. with high roof tiles)
stick the sealing apron extension under
the flexible apron. Pay attention to the
direction the rain water flows in when
doing this.
+5°C – +40°C
Fig. 5.39 Sticking the flexible protection
>
Turn the flexible aprons back at the ends
of the collector array.
i
Make sure that the adhesive sur-
face is dry and free from dust and
grease.
>10 C
Fig. 5.40 Mounting the foam sealing wedge
>
Stick the foam sealing wedge on the side
sections of the collector frame.
>
Stick the foam wedge to the ridge plates.
>
If necessary carefully cut the foam sealing
wedge with the utility knife.
i
Make sure that the adhesive sur-
face is dry and free from dust and
grease.
5 Assembly
Содержание auroTHERM VFK 145/2 H
Страница 43: ......
