19
Installation and maintenance manual atmoCRAFT
GB
1
2
3
Fig. 4.23 Fitting the cover plate
• Place the cover plate (
1
) in position. The braces (
3
) of
the cover plate should be inserted into the slots in the
side plates (
2
). Then push the cover plate back until
the front edge of the cover plate is in line with the
side plates.
1
Fig. 4.24 Fitting the exhaust gas pipe
• Push the exhaust gas pipe (to be provided by the
customer) (
1
) onto the flow safety device.
Note!
Make sure that the exhaust gas pipe (1) is
located tightly within the pipe connection of the
flow safety device.
1
2
3
4
Fig. 4.25 Inserting the front plate
• Place the front plate (
1
) onto the pins (
2
) on the
plinth rail.
• Push the front plate (
1
) using the two pins (
3
) into the
retaining springs (
4
).
Assembly 4
Содержание atmocraft
Страница 1: ...VK 654 9 1654 9 atmoCRAFT DE AT GB...
Страница 2: ......
Страница 44: ...835553_02 DEATGB 092006...
