12
01.03.2017
ST600-900S
1. Setup
Press Setup to access:
a. Calibration of Delivered seed
b. Calibration of Radar
c. Basic settings Front tool
d. Basic settings Drilling unit
e. Basic settings Sequence control
Refer to the instruction manual for general settings:
General (Machine basic settings)
Tramlining.
Alarm settings
Basic settings of coulter pressure.
If you access any of the calibration menus, a pop up will appear:
NOTE:
Feed output stops if you access any of the calibration menus!
Select Yes
A number of things need to be considered before commencing the calibration:
Refer to Attachment 1 for Choice of rotor and setting drilling depth.
• Which seed box roller is suitable for the crop that is to be sown?
Spirit is supplied with three different rollers for the seed feed housing as standard:
Grain roller (large seed), oil plant roller (small seed) and grass seed roller.
Two different rings are also supplied with the machine for lower feed amounts - A rubber ring for, for exam-
ple, maize and hybrids of rye (approx. 20-70 kg/ha).
One for rapeseed (below approx. 2.0 kg/ha).
• Which gear in the seed feed housing is appropriate?
Generally it is always best to try the low gear in the seed feed housing to begin with.
If the low gear does not provide sufficient seed amount when sowing, there will be an alarm “?? max.
speed”.
- Change to the high gear and re-calibrate!
1a.
Calibration of delivered seed
• Is the low level sensor in the correct position?
• Refer to Attachment 1 for other sowing settings.
