20
01.03.2017
ST600-900S
When the front tool and the drilling unit are in the extended position the following menu will be displayed:
Do what is shown on the screen, extend or retract the machine in or out using the red circuit.
NOTE:
Continue to extend for approx. 10-
15 seconds after the wings have come out
in order to pressurise the system.
When extending:
Exit the wing extending/retracting menu by
pressing the Home Screen, lift the machine
using the yellow circuit and keep it there
for approx. 10 seconds in order to line up
the seed drill unit and the front tool.
When retracting:
Exit the wing extending/retracting menu
by pressing the Home Screen, lift the seed
drill unit and front tool to transport height
using the Yellow circuit.
8.
Wing extending/retracting
Press Wing extending/retracting in the Run menu.
Press Start.
Do what is shown on the screen, lower or raise using the lifting circuit (yellow circuit).
