19
01.03.2017
ST 600-900S
6.
Monitoring of seed
Press the axe button to temporarily switch
off the feed output. The button will then
be greyed out and STOP will appear in the
display.
5.
Tramlining cycle
The green tractor pattern is
displayed when tramlining
is taking place.
Selected tramlining program (36
m on a 6 m in this case).
Actual driven pass in the
tramlining cycle.
Refer to the instruction manual for how
to change the tramlining program and
the track width.
Select actual sown amount, and a pop up will appear, make changes using the drop-down list depending on
whether you want to increase or decrease the sown amount, then press Done.
Select actual sown amount again, and then Reset to return to the original sown amount.
6.
Adjustment of the sown amount
E-Contr
ol
