6
01.03.2017
ST600-900S
Track eradicator
If the machine is equipped with CrossBoard and a track eradicator there will
be two control plates by the arm attachments.
When the relationship between CB and SD has been changed, the track eradi-
cators must also be changed in order to achieve the correct angle of attack.
The screws must be set at the same symbol in both of the attachments.
CrossBoard - SystemDisc
The relationship between CrossBoard and SystemDisc can be set to three different values:
•
A
CrossBoard far up in order to go deeply with SystemDisc.
• B
Normal position.
•
C
CrossBoard far down if you do not want to use SystemDisc.
NOTE:
If the machine is equipped with a track eradicator, this must also be rest when the CrossBoard is
adjusted. See next page.
A
B
C
