Vacon Plc
Phone:
+358-(0)201 2121
Fax: +358-(0)201 212 205
Service:
+358-40-8371 150
E-mail: [email protected]
Page 22
V
V
V
V
Vacon
acon
acon
acon
acon
Multi-purpose Control Application II
Multi-purpose Control Application II
Multi-purpose Control Application II
Multi-purpose Control Application II
Multi-purpose Control Application II
2.2
2.2
2.2
2.2
2.2
DIA3 function
DIA3 function
DIA3 function
DIA3 function
DIA3 function
1:
1:
1:
1:
1:
External fault, closing contact =
Fault is shown and motor is stopped when the input is active.
2:
2:
2:
2:
2:
External fault, opening contact =
Fault is shown and motor is stopped when the input is not active.
3:
3:
3:
3:
3:
Run enable
contact open = Motor start disabled
contact closed = Motor start enabled
4:
4:
4:
4:
4:
Acc./Dec contact open = Acceleration/deceleration time 1 selected
time select. contact closed = Acceleration/deceleration time 2 selected
5:
5:
5:
5:
5:
Reverse
contact open = Forward Can be used for reversing if
contact closed = Reverse parameter 2.1 has value 3
6:
6:
6:
6:
6:
Jogg. speed
contact closed = Jogging speed selected for freq. reference
7:
7:
7:
7:
7:
Fault reset
contact closed = Resets all faults
8:
8:
8:
8:
8:
Acc./Dec. operation prohibited
contact closed = Stops acceleration or deceleration until the contact is opened
9:
9:
9:
9:
9:
DC-braking command contact closed =
In Stop mode, the DC-braking operates until the contact is opened,
see figure 6.5. DC-brake current is set with parameter 4.8.
10:
10:
10:
10:
10:
Torque control
contact closed = Forces the motor control mode to torque control, refer to par. 6.1
1
1
1
1
11:
1:
1:
1:
1:
Torque reference sign
This selection changes the sign of the torque reference
12:
12:
12:
12:
12:
Run enable with coasting
contact open = Run and start disabled (stop always with coasting)
contact closed = Motor run enabled
