E
N
G
L
IS
H
42
Automatic Learning of the Operation Time
This menu will activate a procedure enabling the control unit to
automatically find the best duration of the operation time.
(See paragraph "Quick Configuration").
When you select
Go
, configuration menu closes and the learning cycle
starts.
WARNING:
The procedure of the operation time automatic
learning can be starter only if the Start inputs are set up on the
STANDARD mode (
StAn
).
End of Programming
This menu allows to finish the programming (both default and
personalized) saving the modified data into memory.
no
Further corrections to carry out: do not quit the programming.
Si
End of programming.
THE INSERTED DATA HAVE BEEN MEMORIZED: THE CONTROL
UNIT IS READY TO BE USED.