UWE P90, Инструкция по эксплуатации и сборке

Страница: 66 / 77

66
Storage
Store the devices in a dry, frost-free location with a stable temperature. Once the device has
cooled off, pack it in plastic wrapping to protect it against scratches.
* Storage temperature: between 14 °F (-10°C) and 104 °F (+40 °C)
Maximum relative air humidity: ≤ 70 %
Transport
temperature: between -22 °F (-30 °C) and 140 °F (+60 °C)
CAUTION: CONNECT 0NLY TO A CIRCUIT PROTECTED BY A CLASS A GROUND FAULT CIRCUIT
INTERRUPTER. (ONLY FOR CANADA).
ATTENTI0N: BRANCHER SEULEMENT A UNE DERIVATION PROTEGÉE PAR UN DISJONCTEUR
DIFFERENTIEL DE CLASSE.
! Turn off the power to the unit before changing lamps.
RELAMPING INSTRUCTIONS
REPLACEMENT LAMP TYPES
CAUTION: REPLACE ONLY WITH ORIGINAL LAMPS OR FDA APPROVED EQUIVALENT
Cover of lamps (filter discs)
The UV light sources in the canopy are covered by 2.5 mm acrylic panels and in the bed with
two 4 mm (corrugated) and 5 mm acrylic panels.
The lounge acrylic panel is frosted on the lamp side (Equalizing Acrylics) except for the
corrugated acrylic panel in the bed. .
Between the lamps and frame of the canopy and bed respectively, there is a reflector made
of shiny rolled, electroplated, anodized aluminum.
LEDs used in the Tanning Bed:
The color changing LED´s (trinity, multiple-color LED (SMD)) with a remote control. The owner
can adjust speed, which colors are changing, different programs or he can choose only a
static color.
- The LED´s are only used for decoration light.
- Wave length are red: 625-630nm, green: 518-522nm, blue: 465-468nm
- Viewing angle
：
120°
- Power 43.2 W