UWE P90, Инструкция по эксплуатации и сборке

Страница: 32 / 77

32
9. Maintenance and cleaning
Regular maintenance is required for the safe operation of the tanning device and must be
documented. Cleaning must be performed when required.
-
Maintenance work may only be carried out by authorized, trained and qualified staff.
- Before carrying out any maintenance work, the tanning device must be disconnected from
the mains voltage.
9.1 Instructions for cleaning and care
GENERAL
-
Before starting to clean the tanning device, take off any rings, bracelets, watches, etc. that
you might be wearing in order to avoid scratching the surfaces.
- Cleaning fluid must not run into the appliance.
ACRYLIC PANES, GRAB HANDLES AND DOOR HANDLES
-
If possible, use the special cleaning and disinfectant agent “Australian Gold PH Neutral
Disinfectant” supplied by PC Tan for cleaning the acrylic parts and handles, and dilute it
according to manufacturer information.
VARNISHED AND PLASTIC PARTS
-
Use a damp soapy cloth to clean the varnished and plastic surfaces.
- Do not clean the large plastic parts with a dry cloth. This might scratch the surfaces!
CLEANING AGENTS
-
The surfaces and the acrylic panes must not be cleaned with concentrated disinfectants or
solvents or other liquids that contain alcohol!