UTC AEROSPACE SYSTEMS SU320CSX Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 96

background image

SU320CSX

4110-0446, Rev. B

Page 51 of 96

© 2016 UTC Aerospace Systems

Date Printed: 5-Dec-2016

This document does not contain any export controlled technical data.

5.10.

Image Enhancement Commands

The image enhancement algorithm of the CSX, when enabled, performs an enhancement on each pixel of
the frame to produce a higher contrast image for display. The enhancement look-up table for each frame
is computed using the previous frame’s statistics. The frame statistics used to determine the enhancement
look-up table are based on a histogram of the frame’s pixels, e.g., the distribution of the frame’s pixel
values. The enhancement look-up table is generated from the collected histogram by a proprietary
enhancement algorithm. By applying this enhancement algorithm, the pixel data will be stretched over the
available pixel bit depth resulting in a higher contrast scene for display.

When the camera is in the state ENH:AUTO ON (default), enhancements will be automatically controlled
by the camera. To manually control the enhancements the command ENH:AUTO OFF should be sent and
the ENH:POWER command should be used to adjust the image. The ENH:POWER function will only
affect the data when ENH:AUTO is OFF and ENH:ENABLE is ON.

An ENH:POWER decimal value of less than 1

will shape the look-up table in a manner similar to the

green line shown in the Figure. The slope of the curve is greater for the lower input values and will stretch
the lower intensity data over a larger portion of the output, resulting in more shadow detail in the image at
the expense of reducing contrast in the brighter areas of the scene.

An ENH:POWER decimal value of greater than 1

will shape the look-up table in a manner similar to

the blue line shown in the Figure. The slope of the curve is greater for the higher input values and will
stretch the higher intensity data over a larger portion of the output, resulting in more detail in the brighter
areas of the image at the expense of reducing contrast in the lower signal (shadow) areas of the scene.

An ENH:POWER decimal value of 1

will shape the look-up table in a manner similar to the black line

shown in the Figure. The slope of the curve is constant for the input values and will result in an image
where the bright and dark areas of the scene are evenly weighed.

5.10.1.

Set Enhancement State

Description

Sets the state of the image enhancement algorithm.

Figure 13 Example of enhancement algorithm effect on frame histogram.

«
...
49
50
51
52
53
...
»

Содержание SU320CSX

































































































Отзывы:

Нет отзывов

Похожие инструкции для SU320CSX

Бренд: Panasonic Страницы: 2

BL-C1A - Network Camera

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 8

Бренд: NED Страницы: 60

Бренд: Sabre Страницы: 50

Бренд: i-PRO Страницы: 2

Бренд: Edimax Страницы: 2

Бренд: TPG Страницы: 6

Бренд: ACTi Страницы: 2

Бренд: Wheelock Страницы: 10

Бренд: Gallagher Страницы: 67

Бренд: Emergency Assistance+ Страницы: 7

Бренд: Saluki Страницы: 33

Бренд: R&TTE Страницы: 6

NVIP-1DN3020V/IR-1P

Бренд: Novus Страницы: 40

Бренд: D-MAX Страницы: 47

Бренд: SUTO Страницы: 20

VVH-MD657/AVM-360PV

Бренд: Vacron Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды