Utax P-C3060DN, Руководство пользователя

Страница: 94 / 153

Using the Operation Panel 2-69
6
Press [MENU] . The display returns to
Ready
.
MP Tray Empty (Warning when the MP tray is empty)
Turn this setting to
On
if you want the error displayed when the MP tray is
configured as the default paper source, and there is no paper in the MP
tray, or turn it to
Off
not to have the error displayed.
The setting
On
enables the paper-empty message to display when the MP
tray is empty.
1
Press  while
>Error Handling >
is displayed.
2
Press  or  repeatedly until
>>MP Tray Empty
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using

or

.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Timer (Timer setting)
This specifies timer-related settings such as the automatic form-feed
timeout and the timeout settings for Sleep timer.
The options available in Timer are as follows:
• ID (Administrator ID input)
• Password (Administrator Password input)
• Auto Panel Reset (Auto panel reset settings)
• Panel Reset Timer (Setting the panel reset timer)
• Low Power Timer (Low Power Mode timer timeout time)
• Sleep Timer (Sleep timer timeout time)
• Auto Error Clear (Auto error clear setting)
• Error Clear Timer (Setting the error clear time)
• Form Feed Time Out (Automatic form feed timeout setting)
1
Press  while
Device Common >
is displayed.
2
Press  or  repeatedly until
>Timer >
appears.
ID (Administrator ID input)
To use the Timer settings, you must enter an administrator ID. For
information on how to set the administrator ID, refer to
Administrator
(Administrator settings) on page 2-94 .
1
Press  while
>Timer >
is displayed.
2
The message display shows
ID
and a blinking cursor (
_
).
>>MP Tray Empty
? On
>Timer >
ID
_