background image

Using the Operation Panel 

2-87

Job Accounting (Job Accounting selection/
setting)

Job Accounting is a function that allows the number of pages used to be 
managed by each department to be managed through the use of entered 
account IDs. 

Job accounting on this machine offers the following features:

• Support for up to 100 departments
• Department codes up to 8 digits long from 1 to 99999999
• Collective print management for the same department code
• Totaling of the number of pages used for each department
• Specifiable limits (1 to 9,999,999) on the number of pages used
• Resetting of the number of pages used for individual departments

The options available in Job Accounting are as follows:

• ID (Administrator ID input)
• Password (Administrator Password input)
• Job Accounting (Job Accounting selection/setting)
• Select Account (Department-specific settings)
• Add Account (Department registration)
• Delete Account (Department removal)
• Print Job Accounting List (Job Accounting list output)
• Apply Limit (Operation settings when limits are exceeded)
• Unknown ID Job (Operation settings for unknown account IDs)

IMPORTANT  

Select Account

 and 

Delete Account

 are only 

displayed if one or more department codes have been registered. Al-
so, 

Add Account

 is not displayed if the number of registered ac-

counts has already reached the permitted maximum.

1

Press 

[MENU]

.

2

Press 

 or 

 repeatedly until 

Job Accounting >

 appears.

ID (Administrator ID input)

To set up Job Accounting, you must enter an administrator ID. For 
information on how to set the administrator ID, refer to 

Administrator 

(Administrator settings) on page 2-94

.

1

Press 

 while 

Job Accounting >

 is displayed.

2

The message display shows 

ID

 and a blinking cursor (

_

).

3

Press 

 or 

 to increase or decrease, respectively, the value at the 

blinking cursor.  Enter the specified ID. Use 

 and 

 to move the 

cursor right and left. Enter an ID consisting of between 1 and 16 
numbers.

4

Press 

[OK]

. Proceed to the next step 

Password (Administrator 

Password input)

.

Job Accounting

>

ID
_

Содержание P-C3060DN


























































































































































Отзывы: