Utax P-C3060DN, Руководство пользователя

Страница: 68 / 153

Using the Operation Panel 2-43
1
Press  while
>Print Quality >
is displayed.
2
Press  or  repeatedly until
>>Gloss Mode
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
Low
or
High
using

or

.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
EcoPrint Mode (Selecting the EcoPrint mode)
By enabling EcoPrint mode, you can minimize the amount of toner used
during printing. Because images printed in this mode may be slightly
coarser than those printed in standard resolution, you should use
EcoPrint for test prints or other situations where high-quality prints are not
required.
Use the procedure below to select EcoPrint mode. The default setting is
Off
.
1
Press  while
>Print Quality >
is displayed.
2
Press  or  repeatedly until
>>EcoPrint Mode
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using  or  .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Page Set (Setting pagination)
In Page Set menus, you can set the number of copies, page orientation,
and other settings regarding pagination.
The options available in Page Set are as follows:
• Copies (Number of copies)
• Orientation (Print orientation)
• Wide A4 (Wide A4 pitch)
• XPS FitTo Page (Print area setting for XPS data)
• TIFF/JPEG Size (Print mode setting for TIFF/JPEG files)
1
Press  while
Print Settings >
is displayed.
2
Press  or  repeatedly until
>Page Set >
appears.
Copies (Number of copies)
You can set the number of copies of each page to be printed for the
current interface.
Press  while
>Page Set >
is displayed.
>>Gloss Mode
? Low
>>EcoPrint Mode
? Off
>Page Set >