Utax CD 5025 Скачать руководство пользователя страница 16

Страница: 16 / 96

2/3



Adding the operation panel display for the DF connection error.

The attachment is fitted to the bridge and they are attached to the main machine when installing the DF, but the bridge may be attached

without the attachment. Then, the C8990 of Document finisher communication error appears. Therefore, the explanation with the

illustration is added to the operation panel display so that it is confirmed fitting the attachment is omitted.

TRAY SIZE SETTING IMPROVEMENT

New display transition

・

This setting is not to change the default setting of the MP tray but to change size and media by copy.

・

The setting returns to default when the above setting is reset.

・

This setting is for copy and it is not reflected to print output

・

The default setting can be changed in the system menu as before.

The display jumps to set size and media
when selecting the MP tray

Paper size selection display

Media type selection display

No jump to this
setting before

Содержание CD 5025

































































































Результаты поиска

Содержание CD 5025

Отзывы:

Бренды по названию

Популярные бренды

Utax CD 5025, Технический бюллетень

Результаты поиска

Содержание CD 5025

Отзывы:

Бренды по названию

Популярные бренды