US Water Systems Flexx Oxi-Gen FX-150, Руководство пользователя

Страница: 17 / 35

17
3. Pulse H2O2 Setting (J)
•
The default pulse H2O2 setting is 2.
•
Setting pulse H2O2 to 0 will disable it.
•
The maximum value for pulse H2O2 is 4.
•
Change the digit values using the Set / Change and Menu / Enter buttons as de-
scribed above.
The pulse H2O2 setting adjusts how many times and how much H2O2 is injected into the
system during the Air Replenish / H2O2 Injection cycle (Step 4). The table below indicates
the approximate amount of H2O2 solution that will be injected for the different settings.
Notes:
•
If the pulse H2O2 setting is on (1 - 4) the minimum time for the Air Replenish/H2O2 In-
jection cycle step is forced to 20 minutes.
•
If the pulse H2O2 setting is set to 4 the minimum time for the Rapid Rinse cycle step is
forced to a minimum of 5 minutes.
•
H2O2 injection only occurs on full backwash cycle nights (Based on Filter Backwash
Frequency setting). It does not occur on air recharge cycle nights.
•
The H2O2 injection is an optional accessory, the pulse H2O2 setting will only be mean-
ingful if it is installed.
4. Bluetooth Enabled BE - 1 (ON)
BE - 0 (OFF)
•
Toggle the setting with the Set / Change button.
5. Bluetooth Password BBPP is displayed for one second, then password is displayed.
•
Change the digit values using the Set / Change and Menu / Enter buttons as described
above.
6. To Exit the Master Programming Mode, press the Menu/Enter button until time of day re-
turns.
Note: If no buttons are pressed for 60 seconds, the Master Programming Mode will be
exited automatically.
Master Programming Using Onboard Buttons
Pulse H2O2 Setting
Amount of H2O2 Description
0 0 oz. H2O2 option is off, no H2O2 will be injected.
1 8 oz.
H2O2 will be injected in 1 pulse at the beginning of the
cycle step.
2 10 oz.
H2O2 will be injected in 2 pulses, at the beginning of
each ½ of the cycle step.
3 12 oz.
H2O2 will be injected in 3 pulses, at the beginning of each
1/3 of the cycle step.
4 16 oz .
H2O2 will be injected in 4 pulses, at the beginning of each
1/4 of the cycle step.