US Water Systems Flexx Oxi-Gen FX-150, Руководство пользователя

Страница: 25 / 35

25
US Water Flexx Oxi - Gen systems can be purchased with a peroxide injection feed for back-
washing the carbon. This injection will take place during an air injection cycle. Peroxide is
injected during the regeneration process to help “ scrub ” the carbon and keep the system
clean.
1. Locate the brine connection on the side of the valve. It should have
a plastic plug in place.
2. Remove the nut and plug then remove the nut and sleeve from the
plug. Turn it counterclockwise.
3. Install the nut and sleeve on the peroxide suction
tube and push it back into the connection.
4. Tighten the nut by hand then secure it with a
wrench or pliers. Turn it clockwise.
5. Place the other end of the suction tube in the per-
oxide jug and secure the lid.
Peroxide Injection System