US Water Systems Flexx Oxi-Gen FX-150, Руководство пользователя

Страница: 26 / 35

26
Visit us online at www.USWaterSystems.com Give us a call at: 1 - 800 - 608 - 8792
The regeneration cycle can last 30 to 180 minutes, after which soft water service will be re-
stored. During regeneration, hard water (untreated) is automatically bypassed for use in the
household. Hot water should be used as little as possible during this time to prevent hard
water from filling the water heater. This is why automatic regeneration is set for sometime
during the night and manual regenerations should be performed when little or no water will
be used in the household.
You may notice new sounds as your water System operates. The regeneration cycle lasts
up to 120 minutes. During this time, you may hear water running intermittently to the drain.
About The System
Automatic Hard Water Bypass During Regeneration
In the case of emergency, such as an overflowing brine tank, you can isolate your water
System from the water supply using the bypass valve located at the back of the control. In
normal operation the bypass is open with the handle in line with the inlet and outlet pipes.
To isolate the System, simply rotate the handle counter - clockwise (as indicated by the word
BYPASS and arrow pointer on the handle) until it stops. Water can be used at related fix-
tures and appliances as the water supply is bypassing the System. However, the water used
will be hard. To resume soft water service, open bypass valve by rotating the handle clock-
wise.
Manual Bypass