US Water Systems Flexx Oxi-Gen FX-150, Руководство пользователя

Страница: 10 / 35

10
Visit us online at www.USWaterSystems.com Give us a call at: 1 - 800 - 608 - 8792
3. Use the plastic cap glued to the funnel or place a piece of duct tape over the riser tube
so no media enters the riser while filling.
4. Use the Blue Funnel provided, to pour the gravel and carbon into the tank. Pour it
evenly around the hole to ensure it is well distributed in the tank and pour slow
enough, to keep from plugging the hole. A helper may be needed to hold the funnel
during the filling process. The Gravel is poured in first and the Carbon second. Install
all the gravel and carbon that was sent. US Water Systems does NOT send extra me-
dia.
NOTE: It is recommended that a dust mask and safety goggles be worn to prevent
possible injury.
5. When media is installed remove the funnel and move the tank side to side to settle the
media. Now install the Ferric iron collection spheres. Install all the spheres in the
tank. Remove the tape from the distributor tube. Fill the tank with water and allow it to
soak for at least an hour before startup. Re - install the plastic cap on the tank.
System Preparation