US Robotics USR8700, Руководство пользователя

Страница: 66 / 156

Serial ATA 4-Drive NAS
User Guide
Managing Your Storage System - 64
6. When the confirmation message appears, click OK .
If you changed the backup for booting remotely, an asterisk appears next to the selected backup.
Deleting a Backup
You can delete all backups of a given disk, but you cannot delete just an individual backup from a specific
date and time.
To delete all backups of a disk:
1. In the navigation bar, click Backups .
2. Select the disk whose backups you need to delete (in the second Select column).
3. Click Delete Backup .
4. When prompted to confirm the deletion, click OK .
The disk no longer appears on the Backups page, and all backup versions are deleted. If only one
disk was protected, the computer name disappears from the page as well.
Deleting a Client
If you remove DiskSafe Express from a particular computer, or if you change the computer name, the
original computer name remains on the storage system and counts toward the total number of computers
that are allowed to back up to the storage system. To both delete all backups of all disks for a particular
computer and the computer name, you must delete the client.
To delete a client:
1. In the navigation bar, click Backups .
2. Select the computer whose backups and computer name you need to delete from the storage system
(in the first Select column).
3. Click Delete Client .
Note: If you delete all backups of all disks for a particular computer, that computer no longer appears
on the Backups page. However, that computer name remains in the storage system and counts
toward the total number of computers that are allowed to back up to the storage system. If you
need to delete all backups of all disks and the computer name, refer to the next section,
“
Deleting a Client .”
Note: If you delete a backup and the user did not previously remove protection for that disk, when
the user subsequently accesses DiskSafe Express, the Status page will indicate that the
backup of the protected disk is offline. To back up the disk once again, the user must remove
protection and then protect the disk again. For more information, refer to
“Removing
Protection” on page 122 and “Protecting Your Disks” on page 98.